top of page
cylindrical can
丸缶#️110/S
日本製 上代単価550円
156527 ロット60
シルク印刷対応
外寸：直径105✖️高さ73mm（満水量約630ml）
素材：ブリキ（ET）
蓋：被蓋式
まいあめが35個入ります。
156527 ロット60
シルク印刷対応
外寸：直径105✖️高さ73mm（満水量約630ml）
素材：ブリキ（ET）
蓋：被蓋式
まいあめが35個入ります。
丸缶#️85/S
日本製 上代単価520円
156541 ロット60
シルク印刷対応
外寸：直径85✖️高さ62mm（満水量約260ml）
素材：ブリキ（ET）
蓋：被蓋式
まいあめが15個入ります。
156541 ロット60
シルク印刷対応
外寸：直径85✖️高さ62mm（満水量約260ml）
素材：ブリキ（ET）
蓋：被蓋式
まいあめが15個入ります。
Screw can/L
Made in Japan, retail price 670 yen
156558 Lot 24
Supports silk printing
External dimensions: Diameter 100✖️Height 120mm (full water capacity approx. 880ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 200-250g (depending on the tea leaves)
Lid inside with rubber ring
156558 Lot 24
Supports silk printing
External dimensions: Diameter 100✖️Height 120mm (full water capacity approx. 880ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 200-250g (depending on the tea leaves)
Lid inside with rubber ring
Screw can/M/150h
Made in Japan, retail price 620 yen
156565 lot 50
Supports silk printing
External dimensions: Diameter 76✖️Height 150mm (Full water capacity approx. 610ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 150g (depending on the tea leaves)
With rubber ring inside the lid
156565 lot 50
Supports silk printing
External dimensions: Diameter 76✖️Height 150mm (Full water capacity approx. 610ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 150g (depending on the tea leaves)
With rubber ring inside the lid
Screw can/M/100h
Made in Japan, retail price 600 yen
156572 lot 50
Supports silk printing
External dimensions: Diameter 76✖️Height 102mm (Full water capacity approx. 400ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 100g (depending on the tea leaves)
With rubber ring inside the lid
156572 lot 50
Supports silk printing
External dimensions: Diameter 76✖️Height 102mm (Full water capacity approx. 400ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 100g (depending on the tea leaves)
With rubber ring inside the lid
Screw can/M/75h
Made in Japan, retail price 570 yen
156589 lot 50
External dimensions: Diameter 76✖️Height 75mm (full water capacity approx. 290ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 70g (depending on the tea leaves)
With rubber ring inside the lid
156589 lot 50
External dimensions: Diameter 76✖️Height 75mm (full water capacity approx. 290ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 70g (depending on the tea leaves)
With rubber ring inside the lid
Screw can/S
Made in Japan, retail price 540 yen
156596 Lot 50
Supports silk printing
External dimensions: Diameter 68✖️Height 102mm (Full water capacity approx. 310ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 80g (depending on the tea leaves) The inside of the lid has a rubber ring.
156596 Lot 50
Supports silk printing
External dimensions: Diameter 68✖️Height 102mm (Full water capacity approx. 310ml)
Material: Tin (ET)
Lid: screw type
Estimated tea leaf capacity: Approximately 80g (depending on the tea leaves) The inside of the lid has a rubber ring.
Paimaru can/LL
Made in Japan, retail price 420 yen
156879 Lot 50
Supports silk printing
External dimensions: Diameter 75✖️Height 95mm
Material: Tin (ET)
Lid: Covered type
The poly inner lid is sold separately (¥15 each).
Estimated tea leaf capacity: Approximately 80g (depending on the tea leaves)
156879 Lot 50
Supports silk printing
External dimensions: Diameter 75✖️Height 95mm
Material: Tin (ET)
Lid: Covered type
The poly inner lid is sold separately (¥15 each).
Estimated tea leaf capacity: Approximately 80g (depending on the tea leaves)
Paimaru can/L
Made in Japan, retail price 370 yen
156886 Lot 50
Supports silk printing
External dimensions: Diameter 65✖️Height 102mm
Material: Tin (ET)
Lid: Covered type
The poly inner lid is sold separately (¥15 each).
Estimated tea leaf capacity: Approximately 60g (depending on the tea leaves)
156886 Lot 50
Supports silk printing
External dimensions: Diameter 65✖️Height 102mm
Material: Tin (ET)
Lid: Covered type
The poly inner lid is sold separately (¥15 each).
Estimated tea leaf capacity: Approximately 60g (depending on the tea leaves)
Paimaru can/S
Made in Japan, retail price 340 yen
156893 Lot 50
Supports silk printing
External dimensions: Diameter 65✖️Height 75mm
Material: Tin (ET)
Lid: Covered type
The poly inner lid is sold separately (¥15 each).
Estimated tea leaf capacity: Approximately 40g (depending on the tea leaves)
156893 Lot 50
Supports silk printing
External dimensions: Diameter 65✖️Height 75mm
Material: Tin (ET)
Lid: Covered type
The poly inner lid is sold separately (¥15 each).
Estimated tea leaf capacity: Approximately 40g (depending on the tea leaves)
Airtight can/L
Made in Japan, retail price 900 yen
156848 Lot 60
Supports silk printing
External dimensions: Diameter 105✖️Height 170mm (full water capacity approx. 1300ml)
Material: Tin, moisture-proof lid with gasket/polyethylene
Lid: Cover (fit-in) type
Maintains high moisture resistance.
Bean capacity: about 400-500g
156848 Lot 60
Supports silk printing
External dimensions: Diameter 105✖️Height 170mm (full water capacity approx. 1300ml)
Material: Tin, moisture-proof lid with gasket/polyethylene
Lid: Cover (fit-in) type
Maintains high moisture resistance.
Bean capacity: about 400-500g
Airtight can/M
Made in Japan, retail price 750 yen
156855 Lot 60
Supports silk printing
External dimensions: Diameter 95✖️Height 138mm (full water capacity approx. 850ml)
Material: Tin, moisture-proof lid with gasket/polyethylene
Lid: Cover (fit-in) type
Maintains high moisture resistance.
Coffee bean capacity: about 200-250g
156855 Lot 60
Supports silk printing
External dimensions: Diameter 95✖️Height 138mm (full water capacity approx. 850ml)
Material: Tin, moisture-proof lid with gasket/polyethylene
Lid: Cover (fit-in) type
Maintains high moisture resistance.
Coffee bean capacity: about 200-250g
Airtight can/S
Made in Japan, retail price 520 yen
156862 Lot 60
Supports silk printing
External dimensions: Diameter 75✖️Height 120mm (Full water capacity approx. 470ml)
Material: Tin, moisture-proof lid with gasket/polyethylene
Lid: Cover (fit-in) type
Maintains high moisture resistance.
Coffee bean capacity approximately 50-100g
156862 Lot 60
Supports silk printing
External dimensions: Diameter 75✖️Height 120mm (Full water capacity approx. 470ml)
Material: Tin, moisture-proof lid with gasket/polyethylene
Lid: Cover (fit-in) type
Maintains high moisture resistance.
Coffee bean capacity approximately 50-100g
round tea can
Made in Japan, retail price 600 yen
156909 Lot 50
Supports silk printing
External dimensions: Diameter 76✖️Height 102mm (full water capacity approx. 380ml)
Material: Tin (Nashiji)
Lid: Cover (fit-in) type
Estimated tea leaf capacity: Approximately 100g (depending on the tea leaves)
Contains 20 Maiames.
156909 Lot 50
Supports silk printing
External dimensions: Diameter 76✖️Height 102mm (full water capacity approx. 380ml)
Material: Tin (Nashiji)
Lid: Cover (fit-in) type
Estimated tea leaf capacity: Approximately 100g (depending on the tea leaves)
Contains 20 Maiames.
Sealed can M/matte black
Made in Japan, retail price 920 yen
159412 Lot 50
Supports silk printing
External dimensions: Diameter 95✖️Height 138mm (coffee bean capacity approx. 200-250g)
Material: Tin packing/polyethylene
Lid: Cover (fit-in) type
The moisture-proof lid with gasket and the ring inside the top of the main unit maintain high moisture resistance.
It is used as a storage can for coffee beans.
159412 Lot 50
Supports silk printing
External dimensions: Diameter 95✖️Height 138mm (coffee bean capacity approx. 200-250g)
Material: Tin packing/polyethylene
Lid: Cover (fit-in) type
The moisture-proof lid with gasket and the ring inside the top of the main unit maintain high moisture resistance.
It is used as a storage can for coffee beans.
Sealed can M/matte white
Made in Japan, retail price 920 yen
159429 Lot 50
Supports silk printing
External dimensions: Diameter 95✖️Height 138mm (coffee bean capacity approx. 200-250g)
Material: Tin packing/polyethylene
Lid: Cover (fit-in) type
The moisture-proof lid with gasket and the ring inside the top of the main unit maintain high moisture resistance.
It is used as a storage can for coffee beans.
159429 Lot 50
Supports silk printing
External dimensions: Diameter 95✖️Height 138mm (coffee bean capacity approx. 200-250g)
Material: Tin packing/polyethylene
Lid: Cover (fit-in) type
The moisture-proof lid with gasket and the ring inside the top of the main unit maintain high moisture resistance.
It is used as a storage can for coffee beans.
bottom of page